You can find your unique FCC ID for your Fi Tracker and Fi Base easily within the Fi App.
Finding Your Fi Tracker FCC ID
-
In the Fi App, tap your pet's profile picture in the lower right corner. Once you are in the profile, tap the 3 stacked lines to open the Settings Menu:
-
Tap on Your Pack
-
Tap on the pet whose tracker you need to find the FCC ID for.
-
Tap the information icon in the top-right corner. This will open a menu with information about the tracker, including the FCC ID.
Finding Your Fi Base FCC ID
-
-
In the Fi App, tap your pet's profile picture in the lower right corner. Once you are in the profile, tap the 3 stacked lines to open the Settings Menu:
-
Tap on Your Pack
-
Scroll down to the Base section and tap the Base you need to find the FCC ID for
-
Tap the information icon in the top-right corner. This will open a menu with information about your Fi Base.
-
In the Fi App, tap your pet's profile picture in the lower right corner. Once you are in the profile, tap the 3 stacked lines to open the Settings Menu:
Fi Tracker - FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device includes a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to RF energy set by the Federal Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and establish permitted levels of RF energy for standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for portable mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. Tests for SA are conducted using standard operations positions reviewed by the FCC, with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a portable mobile device is available for sale to the public, it must be tested and certified by the FCC to not exceed the limit established by the government-adopted requirement for sale exposure. Tests are performed for each device as required by the FCC in positions and locations such as on the body or at the ear. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement for safe exposure. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) website at http://www.ctia.org.
Fi Base - FCC Regulations
This mobile router complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This mobile router has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Note:
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm during normal operation.
WPT: When using this device as a wireless charger, it is intended for use as a desktop device and should not be carried when in this mode. To comply with RF exposure requirements when using in the wireless charging mode please place the device at a minimum distance of 20 cm from persons.
EU Declaration of Conformity
Hereby, Fi declares that the radio equipment type Series 3+ is in compliance with Directive 2014/53/EU. This product is allowed to be used in all Member States. The full text of our EU Declaration of Conformity is available at: fitracking.com/doc.